How it works

 

Dorgard X is activated by System X (TX). When Dorgard X receives a signal from the TX unit the Dorgard X will release the fire doors preventing the spread of fire and smoke.

Any number of Dorgard X units can be linked to any one System X unit within range, although a Site Survey must be carried out prior to installation.

System X receiving sound

Dorgard X receiving signal

Operating Dorgard X

To hold the door open

  1. Open the door to the required ‘hold open’ position, or open fully against the bump stop of the floor plate (if fitted).
  2. Stand sideways to the door.
  3. Press the black knob down using your foot. Greater foot pressure may be needed depending upon force from the door closer or the type of floor surface.
  4. Whilst depressing the black knob pull the door gently in the direction of closing.
  5. Remove your foot and let go of the door.

To release Dorgard X manually

  1. Lightly kick the black knob toward the door.
  2. Or push the door in the direction of opening. Dorgard X can only be released by kicking the black plunger knob if a floorplate is installed.

Please click here to download the System X, including Dorgard X Technical Specification

Please click here to download the Dorgard X Userguide